Mold Removal San Antonio,TX and Remediation Services

San Antonio Mold Remediation

Once we have assessed on the kind of mold in your house and the amount of its impact, we then proceed on to implement the best strategy for mold remediation at your property. Our team conducts mold remediation in a phased manner where we remove the mold and ensure that the surface of growth is decontaminated completely and there is sufficient measures put in place to arrest any future growth of molds.

Removing contaminated materials from mold affected areas can be quite a delicate job and it has to be handled with extreme caution. If the mold in question is of the black mold category then disturbing the infected area could cause the mold spores to be airborne. And these are quite dangerous to the people who breathe in the infected air. Our team will ensure that proper protective measures are in place and the property is completely secured before proceeding with mold remediation.

For quality assessment on mold detection contact Cat Mold Removal San Antonio at (210) 987-3192.

Using The Right Technique

Once we have identified the affected area, we then proceed onto removing the contaminated mold from the area carefully with the required protection gear in place. While we remove the mold, we ensure the presence of an air scrubber to keep the air cleaner until the mold is removed in its entirety. We then proceed onto using hepa vacuum on the affected surface and use antibacterial solutions, sealants, etc. to arrest any future growth and to ensure that there is no left over within the surface.

We proceed to remove the odor causing agents and deodorizing the area only after we are assured of removing the last of the mold spore from your house or office.

For quality assessment on mold detection contact Cat Mold Removal San Antonio at (210) 987-3192.

Why Should You Choose Cat Mold Removal San Antonio?

Specialists At Your Service

Our team comprises of specialists who have vast experience and knowledge in the field of mold removal and remediation and we apply our knowledge for your betterment. Our technicians are trained and are always ready to meet new challenges and help reduce the severity of loss and damage to your property and health.

We offer mold remediation and removal services for both commercial and residential properties.

Mold assessment activities include an Removal, investigation, or survey of a dwelling or other structure to provide the owner or occupant with information regarding the presence, identification, or evaluation of mold, the development of a mold management plan or remediation protocol, and the collection or analysis of a mold sample. Mold remediation means the removal, cleaning, sanitizing, demolition, or other treatment, including preventive activities, of mold or mold-contaminated matter. The industry is regulated to ensure that persons conducting mold assessment and remediation services in Texas are properly trained, and are following minimum standards that protect the health of workers and building occupants.

Contact us to keep you, your family and your property safe from molds at (210) 987-3192.

Cat Mold Removal San Antonio

San Antonio, Texas 78216

Phone:(210) 987-3192.

Email:[email protected]

Mold Removal San Antonio

Mold removal is essential to keeping a home and the people in it safe, healthy, and comfortable. Mold, mildew, rot, and dust mites can cause serious health issues, including asthma, allergies, eye and respiratory issues, and much more. Mold can also reduce a home’s property value and lead to costly structural damage. Continue reading to learn more about rot and how to control, remove, and prevent mold growth in your home.

Understanding Mold

Microscopic mold spores exist almost everywhere, outdoors and indoors, making it impossible to remove all mold from a home or business. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

• Mold is present almost everywhere, indoors and outdoors.
• Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
• Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water.
• Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
• Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
• Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

Is it safe to stay in a house with mold?

It is not safe. Mold growth will slowly consume building materials while dispersing tiny spores that can severely impact the health and safety of everyone on the property. This can start happening in as little as a few days. This is why a professional remediation service must be called right away to restore the property and a clean living environment for everyone.

How long does it take for mold to spread in walls?

The bad news is that mold can be found almost anywhere, and it thrives off moisture. Mold prefers an environment that has little to no air circulation, dim lighting, and an average temperature of 68 degrees Fahrenheit. Mold spores travel through the air, attach themselves to any damp surface, and then begin attacking the surface of the material they adhere to. This is one of many reasons why it is imperative for a homeowner to quickly contact a mold remediation company if they have experienced a fire or flood in their home.

Mold begins growing immediately after the spores have adhered to an item. It is not uncommon for mold to begin to grow within 24 to 48 hours, and a mold infestation can colonize within 1 to 14 days.

The Process of Mold Remediation

The Environmental Protection Agency (EPA) notes that any moldy areas less than 10 square feet (about 3 feet by 3 feet) can be remediated by the homeowner. Beyond that, you may want to talk to a mold remediation contractor. In most cases, it is better to have a mold remediation contractor do the work than a general contractor.

Even though chlorine bleach is often used to kill mold, bleach is not an EPA-approved biocide. For that, you will need to use a product such as Mold Stat. If a space 3-foot by 3-foot of mold growth is heavily concentrated or near the HVAC system, it should be contained to prevent dispersal.

Containment and Ventilation

The first step, and arguably the most important, is setting up containment and ventilation. The use of proper ventilation and air filtration devices (AFDs) such as air scrubbers is required to ensure that mold spores that are disturbed and become airborne are not spreading to an uninfected area.

Cleaning and Disinfection

Cleaning and disinfecting is the next step and this is the stage that includes the actual remediation and disposal of infected materials. After the cleaning and disinfecting, then the technicians apply biocide/fungicide/moldicide solutions.

Fix the Mold Source

The next step is where the technicians address any moisture or humidity concerns. For example, if a loose bathroom fan duct is running into an attic, the fan duct may be fixed. If the fix is easy, the mold remediation company may take on the repair by itself. For more involved repairs, the company may hire a sub-contractor or recommend one for the homeowner.

Encapsulate the Mold

Mold that has not been removed is encapsulated by paint or a similar material. Encapsulation is an approved method of dealing with mold in a home.

Removing Black Mold in the House

• It is very important to know the source of the water accumulation. Fixing it is the first step of the successful removal of black mold. If you have a high relative humidity in a room or area (55% or higher), then you should strongly consider a dehumidifier.

Minimize dust and seal off affected areas. Before cleaning and removing the mold, take necessary measures to prevent the mold from spreading. Mold spores become airborne during the cleaning process so contain the area being cleaned.

Each room should be cleaned separately. Seal the room off before beginning the cleaning process. Cleaning, as mentioned earlier, can stir up the mold so it is vital to prevent them from disseminating.

Toxic black mold removal on a dry area can be done by lightly misting the area with water before cleaning the mold. Dry mold has a much greater chance of becoming airborne when disturbed.

Remove and discard mold-infected materials by throwing them into heavy-duty plastic bags. Get the bags outside a window or other openings accessible to the room being cleaned.

Will dehumidifiers remove mold

Dehumidifiers serve the purpose of reducing the level of relative humidity in the air. High humidity is a leading contributor to mold growth, since mold spores require moisture. A dehumidifier can prevent mold from activating by keeping an area dry, but if mold already has overtaken a particular room, a dehumidifier can aid in the removal process.

A dehumidifier can dry out a room by drawing the moist air inward and trapping the liquid. If a room has active mold, it also must have a presence of moisture. By eliminating the moisture, you eliminate the ability of the mold to produce nutrients, thereby rendering it dormant. Place the dehumidifier near the mold-affected area and select a high power setting. Allow the device to run until the room dries completely.

Mold removal cost

Price of mold removal depend on the size of the job — they can often be over $1000. But, some mold professionals out there exaggerate the amount of work that needs to be done, driving up the price. If you think a quoted price seems high, we recommend getting multiple quotes to compare.

However, if you get a quote that’s shockingly low, that’s also a big red flag. Companies that don’t do things properly are the only ones that can charge shockingly low prices.

Mold professionals are skilled tradesmen, just like a plumber or electrician, so you can expect to pay more for a mold company than a regular handyman. Keep in mind that mold professionals have high overhead costs, such as high general liability and workers comp insurance, which also factors into their price.

Wanna keep things really cheap? Do it yourself! In some cases, minor mold problems (less than about 10 square feet of mold) in places like a bathroom corner can easily be handled by a handy homeowner with a free weekend afternoon and a few basic supplies from the hardware store. For more information, see our previous post on the subject: Do I need a Mold Remediation Professional?

No need to take a wrecking ball to the entire house at the sight of a little mold. You can keep the price down by focusing just on the area where there is visible mold. For example, mold on drywall in one corner of the room only needs cut out and replaced in that corner. Yes, the rest of the room (and maybe adjoining rooms) should be cleaned, but only damaged drywall needs to be cut out and replaced.

Is mold remediation expensive?

The average cost of mold remediation is $2,325, with most homeowners spending between $1,500–$3,150 or $15 to $31 per square foot. A small mold removal job costs an average price of $500–$1,500 while a larger job costs around $3,000–$6,000. If the moldy area is 10 square feet or less, you can handle the job yourself for about $50.

MOLD REMOVAL COST

• National Average Cost $2,325
• Minimum Cost $500
• Maximum Cost $6,000
• Average Range $1,500 to $3,150

Who pays for mold remediation?

What does a mold Removal cost?

The cost of having a mold Removal in your house depends on the following factors:

• Type of test (air sampling, surface sampling)
• Size of the area to be tested

Mold Removals can cost between $300 to $400 for small and medium-sized houses, while it can cost between $700 to $900 for larger houses.

If there is already visible mold growth, it will lower the costs unlike when Removals are done in the drywall.

Professional Mold Removal

Mold can be a scary thing, but fortunately, it’s not something that is impossible to control or remove. Experts know that mold must have two things to survive and thrive: moisture and humidity. A mold removal specialist can visit your home to identify places where mold is growing or has previously grown.

Such specialists can then thoroughly seal your home so that it is fully waterproofed and protected from future mold growth. If necessary and applicable, the mold removal specialist may also wish to install a crawl space vapor barrier system to protect both your home and your health.

If you suspect mold growth in your basement or other areas of your home, contact a mold removal specialist as soon as possible. Remember: a musty-smelling home is an unsafe home. Take the necessary steps to protect your family and your property by investing in mold removal services today!

Do sellers have to disclose mold?

In many states, laws about home selling and mold require the seller to disclose information about a past or present mold problem in the home. However, if the seller is not aware of a mold problem, and could not be reasonably expected to know, then he doesn’t have to disclose it. Basically, that means that if there is mold growing all over a wall, he has to tell you about it but he does not have to crawl into a crawlspace or look inside the walls to see if there is mold there. If he knows about mold in the crawlspace or walls, though, he must tell you about it. If the seller doesn’t tell you about a mold problem, he may be liable for any mold-related costs you end up incurring.

Symptoms of mold poisoning

Level – I Common Symptoms of Mold Exposure

The most commonly reported symptoms of short term Mold exposure:

• Sneezing
• Itching Skin
• Redness and skin irritation
• Watery Eyes
• Itching Eyes
• Headache

Level – II Advanced Symptoms of Mold Exposure

The following symptoms of Mold exposure have been reported generally as a result from persons being in a Mold contaminate environment on and off for an extended period of time. Symptoms are reported to have become more severe and longer lasting directly in proportion to the length of exposure time. Their reported symptoms are as follows:

We know mold removal can be a daunting task. Where should you begin? And how can you get it done right at a reasonable price? Well, the truth is that mold removal isn’t as complicated as it’s often made out to be. And the right mold professional can guide you through the process while charging a reasonable price.

Stages of mold